How much knowledge do you know about energy-saving LED strips?

How much knowledge do you know about energy-saving led strips? Lighting used in daily life is essential. For daily lighting at home, daily lighting also requires a lot of electricity and wastes energy. So how can we achieve both power saving and lighting? Below we will provide you with some tips for energy saving LED lights, hoping to help you.

1. Energy-saving lamps should not be switched frequently

Energy-saving lamps consume electricity when they are started, and each time they are switched on and off, the life of the bulb will be reduced by about 3 hours, so it is recommended to reduce the switching frequency of energy-saving lamps as much as possible.

2. Reasonable choice of lighting degree

For incandescent lamps, generally speaking, 2 watts per square meter of lighting in the bathroom is enough. 4 watts per square meter is enough for the dining room and kitchen. The study and living room should be larger, requiring 8 watts per square meter; the lamps on the desk and bedside table can use 15-60 watt bulbs, preferably no more than 60 watts.

If the incandescent lamps used in indoor lighting are changed to energy-saving lamps, the 18-watt energy-saving lamps are equivalent to the brightness of 40-watt ordinary T8 fluorescent lamps. If an electronic ballast is used, the energy-saving lamp can be started when the voltage is 150 volts. At this time, its power consumption is only 0.1 watt per hour, which is low and safe.

3. Regular cleaning of lighting fixtures

When the lamp has not been cleaned for a long time, the lamp tube and reflector will gradually accumulate dust, which will reduce the output efficiency. Therefore, the lamp should be cleaned regularly at least every three months to maintain the output efficiency of the lamp.

4. Regular replacement of old lamps

You can choose the newly launched tube-in-tube energy-saving lamps series energy-saving lamps. When incandescent lamps and fluorescent lamps are used to 80% of their lifespan, the output beam will be reduced to about 85%, so they should be replaced before the end of their lifespan. For office buildings with a large number of lighting, the regular replacement of light sources is particularly important. In addition to saving labor costs for replacing lamps and improving indoor illuminance, it can also save electricity.

5. Replace low-efficiency light sources or lamps

Replacing incandescent lamps with LED lamps, the power consumption of incandescent lamps is about three times that of LED lamps. For places with a long lighting time or infrequent switching operations, such as living rooms, bedrooms, etc., remove the incandescent lamps and use energy-saving lamps. A series of light sources can immediately achieve the purpose of saving electricity. Power saving and energy saving Starting from you and me, starting from bit by bit, energy saving and environmental protection – just to continue the wonderfulness of the earth!